标准号 |
标准中文名称 |
标准英文名称 |
摘要 |
ISO 2858-1975 |
离心式末端轴吸泵(额定压强 16巴).标记,标定工作点和尺寸 |
(End-suction centrifugal pumps (rating 16 bar); Designation, nominal duty point and dimensions) |
[详细信息] |
ISO 2382-6-1987 |
信息处理系统.词汇.第06部分:数据准备和处理.双语版 |
(Information processing systems; Vocabulary; Part 06: Preparation and handling of data Bilingual edition) |
[详细信息] |
ISO 4175-1979 |
造船.船载驳船,第1系列.主要尺寸 |
(Shipbuilding; Shipborne barges, series 1; Main dimensions) |
[详细信息] |
ISO 17287-2003 |
道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程 |
(Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving) |
[详细信息] |
ISO 238-1974 |
莫氏锥柄刀具用的异径连接套和延伸套筒 |
(Reduction sleeves and extension sockets for tools with Morse taper shanks) |
[详细信息] |
ISO IEC 14598-2-2000 |
软件工程.产品评价.第2部分:计划和管理 |
(Software engineering - Product evaluation - Part 2: Planning and management) |
[详细信息] |
ISO 4205-1991 |
直柄实心导杆90°埋头钻 |
(Countersinks 90? with parallel shanks and solid pilots) |
[详细信息] |
ISO 4708-2000 |
复合软木.衬垫材料.试验方法 |
(Composition cork - Gasket material - Test methods) |
[详细信息] |
ISO 1189-1986 |
电影技术.在35mm电影胶片上除成条发行拷贝外的磁性声带的录音特性.规范 |
(Cinematography; Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints; Specifications) |
[详细信息] |
ISO 3294-1975 |
60°,90°和 120°角的尖底锪钻 |
(Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive) |
[详细信息] |
ISO 13641-1-2003 |
水质.厌气菌的气体生成的抑制测定.第1部分:一般试验 |
(Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 1: General test) |
[详细信息] |
ISO 11898-1-2003 |
道路车辆.控制器局域网络.第1部分:数据链层和物理信令 |
(Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling) |
[详细信息] |
ISO 10306-1993 |
纺织品.棉纤维成熟度的空气流动法评定 |
(Textiles; cotton fibres; evaluation of maturity by the air flow method) |
[详细信息] |
ISO 12176-4-2003 |
塑料管材和管件.聚乙烯系统的熔接设备.第4部分:可追踪性编码 |
(Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding) |
[详细信息] |
ISO IEC
15292-2001 |
信息技术.安全技术.防护轮廓注册规程 |
(Information technology - Security techniques - Protection Profile registration procedures) |
[详细信息] |
ISO TR
10465-2-1999 |
挠性玻璃纤维增强的热固树脂(GRP)管的地下安装.第2部分:静态计算方法的比较 |
(Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes - Part 2: Comparison of static calculation methods) |
[详细信息] |
ISO 4299-1989 |
锰矿石.含水量的测定 |
(Manganese ores; determination of moisture content) |
[详细信息] |
ISO 3932-1976 |
纺织品.机织物.匹幅宽的测量 |
(Textiles; Woven fabrics; Measurement of width of pieces) |
[详细信息] |
ISO 477-1982 |
纺织机械和附件.锥形筒子和络筒机.词汇.三种语言版 |
(Textile machinery and accessories; Cone and cheese winding machines; Vocabulary Trilingual edition) |
[详细信息] |
ISO 3105-1994 |
玻璃毛细现象动态粘度计.规范和操作说明 |
(Glass capillary kinematic viscometers - Specifications and operating instructions) |
[详细信息] |
ISO 11140-3-2000 |
卫生保健产品的灭菌.化学指示器.第3部分:蒸气渗透试验薄板材用2级指示器 |
(Sterilization of health care products - Chemical indicators- Part 3: Class 2 indicators for steam penetration test sheets) |
[详细信息] |
ISO 9349-1991 |
预绝缘高强度铸铁管道系统 |
(Preinsulated ductile iron pipeline systems) |
[详细信息] |
ISO 9589-1994 |
建筑物自动扶梯的尺寸 |
(Escalators - Building dimensions) |
[详细信息] |
ISO 3867-2001 |
合成软木.膨胀连接填充料.试验方法 |
(Composition cork - Expansion joint fillers - Test methods) |
[详细信息] |
ISO IEC TR
12182-1998 |
信息技术.软件的分类 |
(Information technology - Categorization of software) |
[详细信息] |
