标准号 |
标准中文名称 |
标准英文名称 |
摘要 |
prEN 50297-2000 |
道路和街道照明的光电控制器 |
Photoelectric control units for road and street lighting |
详细信息 |
EN 725-5-1996 |
先进技术陶瓷 陶瓷粉的试验方法 第5部分:粒径分布的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution |
详细信息 |
prEN 2435-02-2001 |
航空航天系列 涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆 第4部分:强耐腐蚀性 |
Aerospace series - Paints and varnishes; Corrosion resistant chromated two component cold curing primer - Part 02: High corrosion resistance |
详细信息 |
prEN 2434-01-2001 |
航空航天系列 涂料和清漆 双组分冷固化聚亚安脂光洁度 第01部分:基本要求 |
Aerospace series - Paints and varnishes; Two component cold curing polyurethane finish - Part 01: Basic requirements |
详细信息 |
EN 61000-4-4/prAA-2000 |
电磁兼容性(EMC) 第4部分:试验和测量技术 第4节:电快速瞬变/猝发抗扰试验 基本EMC出版物 修改AA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
详细信息 |
ENV 725-11-1993 |
先进技术陶瓷 陶瓷粉的试验方法 第11部分:自然烧结物稠密度测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of the densification on natural sintering |
详细信息 |
EN 61000-4-8/prAB-2000 |
电磁兼容性(EMC)第4部分::试验和测量方法 第8节:工频磁场抗扰度试验 基础(EMC)出版物 修改AB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
详细信息 |
prEN 2434-04-2001 |
航空航天系列 涂料和清漆 双组分冷固化聚亚安脂末光洁度 第04部分:高弹性 |
Aerospace series - Paints and varnishes; Two component cold curing polyurethane finish - Part 04: High flexibility |
详细信息 |
EN 572-2-1994 |
建筑用玻璃 基本钠钙硅玻璃制品 第2部分:浮法玻璃 |
Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
详细信息 |
prEN 61820-2001 |
机场照明和信标用电气设备 航空地面照明用恒流串联电路 系统设计和安装要求 |
IEC 61820, Ed. 1: Electrical installations for lighting and beaconing of aerodromes - Constant current series circuits for aeronautical ground lighting; System design and installation requirements |
详细信息 |
prEN 40-2-1999 |
灯柱 第2部分:一般要求和尺寸 |
Lighting columns - Part 2: General requirements and dimensions |
详细信息 |
EN 12337-1-2000 |
建筑物玻璃 化学加强碱石灰硅酸盐玻璃 第1部分:定义和描述 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description |
详细信息 |
prENV 41117-1991 |
信息系统互连 在B信道使用ISDN信息模式传输服务载体在OSI连接模式网络服务上的OSI连接模式传输服务规定 |
Information systems interconnection; provision of OSI Connection-mode Transport Service over the OSI Connection-mode Network Service by using the ISDN Packet Mode Bearer Service on the B-channel: demand case |
详细信息 |
EN 61000-4-12/prAB-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法 第12节:振荡波抗扰性试验 基础EMC出版物 修改AB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
详细信息 |
EN 55011/prA3-1998 |
工业、科学、医疗(ISM)射频设备 电磁骚扰特性 测量方法和限值 修改prA3 |
Amendment 3 to CISPR 11 |
详细信息 |
EN 55022/prAE-2001 |
通信端口的说明 修改prAE |
Modification of CISPR 22: Clarification of telecommunication ports |
详细信息 |
EN ISO 4892-2-1999 |
塑料 实验室光源暴露方法 第2部分:氙弧灯 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994) |
详细信息 |
EN ISO 4892-3-1999 |
塑料 实验室光源暴露方法 第3部分:UV荧光灯 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:1994) |
详细信息 |
ENV 1402-2-1997 |
粗制的耐火产品 第2部分:测试抽样 |
Unshaped refractory products - Part 2: Sampling for testing |
详细信息 |
EN 821-1-1995 |
先进技术陶瓷 单片陶瓷 热物理特性 第1部分:热膨胀率的测定 |
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion |
详细信息 |
ENV 12289-1996 |
高级工艺业陶瓷 环境温度下陶瓷合成物的机械特性 平面内剪切特性的测定 |
Advanced technical ceramics - Mechanical properties of ceramic composites at ambiant temperature - Determination of in-plane shear properties |
详细信息 |
EN 12898-2001 |
建筑物玻璃 热辐射系数的测定 |
Glass in building - Determination of the emissivity |
详细信息 |
EN ISO 6603-2-2000 |
塑料 硬质塑料冲孔性能的测定 第2部分:仪器冲击试验 |
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
详细信息 |
ENV 821-3-1993 |
先进技术陶瓷 单片陶瓷 热物理性能 第3部分:比热的测定 |
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity |
详细信息 |
EN 623-1-1995 |
先进技术陶瓷 单片陶瓷 一般和纹理特性 第1部分:用染色穿透试验法测定缺陷 |
Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration tests |
详细信息 |