标准号 |
标准中文名称 |
标准英文名称 |
摘要 |
HD 384.4.47 S2-1995 |
建筑物的电气设施 第4部分:安全保护 第47章:安全保护措施的应用 第470节:总则 第471节:电击防护措 |
Electrical installations of buildings - Part 4: Protection for safety - Chapter 47: Application of protective measures for safety - Section 470: General - Section 471: Measures of protection against electric shock (IEC 60364-4-47:1981 + A1:1993, modified |
[详细信息] |
EN 12354-2-2000 |
建筑声学 根据构件性能评定建筑物的声学特性 第2部分:房间之间的碰撞隔声 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms |
[详细信息] |
EN ISO 140-1-1997 |
声学 建筑物和建筑构件的隔声测量 第1部分:能抑制侧向传声的实验室试验装置的要求 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997) |
[详细信息] |
HD 384.7.704 S1-2000 |
建筑物的电气设施 第7部分:特殊设施或场所的要求 第704节:建筑和拆除工地的设施 |
Electrical installations of buildings - Part 7: Requirements for special installations or locations; Section 704: Construction and demolition site installations (IEC 60364-7-704:1989, modified) |
[详细信息] |
EN 20140-9-1993 |
声学 建筑物和建筑构件的隔声测量 第9部分:上方有压力通风室的悬挂天花板的空气声隔声的实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (ISO 140-9:1985) |
[详细信息] |
prEN ISO 15614-2-2000 |
金属焊接工艺的规范和验收 焊接工艺试验 第2部分:铝及其合金的电弧焊 |
Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000) |
[详细信息] |
CR 1752-1998 |
建筑物通风 室内环境设计标准 |
Ventilation for buildings - Design criteria for the indoor environment |
[详细信息] |
EN 1838-1999 |
照明设施 应急照明 |
Lighting applications - Emergency lighting |
[详细信息] |
EN 29052-1-1992 |
声学 动力劲度的测定 第1部分:住宅用浮筑地板材料 |
Acoustics - Determination of dynamics stiffness - Part 1: Materials used under floating floors in dwellings |
[详细信息] |
HD 384.7.714 S1-2000 |
建筑物的电气设施 第7部分:特殊设施或场所的要求 第714节:室外照明设施 |
Electrical installations of buildings - Part 7: Requirements for special installations or locations - Section 714: Outdoor lighting installations (IEC 60364-7-714:1996, modified) |
[详细信息] |
EN 259-2-2001 |
卷式墙面饰层 重负载墙面饰层 第2部分:冲击阻力的测定 |
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance |
[详细信息] |
EN 50164-1-1999 |
避雷装置元件(LPC) 第1部分:连接元件的要求 |
Lightning Protection Components (LPC) - Part 1: Requirements for connection components |
[详细信息] |
EN 1488-2000 |
建筑阀门 膨胀类 试验和要求 |
Building valves - Expansion groups - Tests and requirements |
[详细信息] |
HD 500 S1-1988 |
用于测量储热水加热器能耗和用于通报消费者储热水加热器能耗的方法 |
Methods to be used for measuring energy consumption of thermal storage water heaters and for the purpose of informing consumers of it |
[详细信息] |
EN 303-3-1998 |
供暖锅炉 第3部分:燃气中央供暖锅炉 包括锅炉体和强制通风式燃烧器的系统 |
Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner |
[详细信息] |
EN 266-1991 |
卷式墙面饰层 纺织墙面饰层规范 |
Wall coverings in roll form; specification for textile wall coverings |
[详细信息] |
EN 200-1989 |
卫生用水龙头 PN10型单一和混合水龙头(公称尺寸1/2)通用技术规范 最小流动压力0.05MPa(0.5bar) |
Sanitary tapware - General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10; Minimum flow pressure of 0,05 MPa (0,5 bar) |
[详细信息] |
EN 525-1997 |
净热输入值不超过300kW的空间加热用非家用直接燃气强制对流的空气加热器 |
Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
[详细信息] |
EN 12149-1997 |
转动型墙面饰层 甲醛释放和乙烯基氯化物单体、重金属和其它特定元素迁移的测定 |
Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
[详细信息] |
EN ISO 10545-16-2000 |
陶瓷砖 第16部分:小色差的测定 |
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:1999) |
[详细信息] |
EN 772-13-2000 |
砌块的试验方法 第13部分:砌块净密度和毛干密度的测定(天然石除外) |
Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone) |
[详细信息] |
prEN 1555-6-1995 |
供给气体燃料用塑料管道系统 聚已烯(PE) 第6部分:推荐的安装实践 |
Plastics piping systems for gaseous fuels supply - Polyethylene (PE) - Part 6: Recommended practice for installation |
[详细信息] |
EN 933-5-1998 |
集料的几何性能试验 第5部分:粗糙粒子集合中表面碎裂百分率测定 |
Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles |
[详细信息] |
EN 678-1993 |
热压处理过的加气混凝土的干密度测定 |
Determination of the dry density of autoclaved aerated concrete |
[详细信息] |
EN 933-6-2001 |
集料的几何性能试验 第6部分:表面特性的评估 集料的流量系数 |
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics; Flow coefficient of aggregates |
[详细信息] |