EN ISO 1599-1999

塑料　乙酸纤维素　模塑时粘度降低的测定

Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990)

[详细信息]

prEN 61372-2001

汽轮机及其循环的简化热性能试验

Simplified thermal performance testing of steam turbines and their cycles

[详细信息]

prEN 13422-1998

立式公路设备 便携式公路交通标志 锥体和柱体

Vertical road equipment - Portable road traffic signs - Cones and cylinders

[详细信息]

EN 13212-2001

路标材料 工厂生产控制

Road marking materials - Requirements for the factory production control

[详细信息]

prEN 4539-1-2001

航空航天系列　低振动状态下高负荷的自润滑衬套的耐腐蚀钢球面普通轴承　宽系列　米制系列荷载和尺寸

Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner; Elevated load under low oscillations; Wide series - Dimensions and loads; Metric series

[详细信息]

EN ISO 15304-2002

动植物脂肪和油　植物脂肪和油中过脂肪酸异构体含量测定　气相色谱法

Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002)

[详细信息]

prEN 14023-2001

沥青和沥青粘合剂　聚合改性沥青的规范

Bitumen and bituminous binders - Specifications for polymer modified bitumens

[详细信息]

ENV 13459-2-1999

公路标志材料 质量控制 第2部分：制定材料质量方案导则

Road marking materials - Quality control - Part 2: Guidelines for preparing quality plans for materials application

[详细信息]

EN 12107-1997

塑料管道系统　压注热塑管件、阀门和辅助设备　管道组件压注用热塑 材料的长期液压强度的测定

Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components

[详细信息]

EN 61076-4-110-2002

电子设备用连接器　第4-110部分：有质量评定的印制板连接器　包括完全屏蔽和闭锁功能的基本网格为2.0mm闭锁

Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001)

[详细信息]

ENV 13459-3-1999

公路标志材料 质量控制 第3部分：使用中的性能

Road marking materials - Quality control - Part 3: Performance in use

[详细信息]

prEN 61337-1-2-1999

采用波导型介电谐振器的滤波器　第1-2部分：试验条件

Draft IEC 61337-1-2: Filters using waveguide type dielectric resonators - Part 1-2: Test conditions

[详细信息]

EN ISO 2554-1998

塑料　不饱和聚脂树脂　羟基值的测定

Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997)

[详细信息]

ENV 13563-2000

交通控制设备 车辆探测器

Traffic control equipment - Vehicle detectors

[详细信息]

prEN 61338-1-2-1998

波导型介电谐振器　第1-2部分：试验条件

Draft IEC 61338-1-2: Waveguide type dielectric resonators - Part 1-2: Test conditions

[详细信息]

EN ISO 3671-1998

塑料　氨基模塑材料　挥发性物质的测定

Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)

[详细信息]

EN ISO 1598-1999

塑料　乙酸纤维素　不溶物的测定

Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)

[详细信息]

prEN 14388-2002

道路交通降噪设备 规范

Road traffic noise reducing devices - Specifications

[详细信息]

prEN 190117-1992

空白详细规范　实行能力批准的数字标准元件

Blank detail specification; digital standard cells under capability approval

[详细信息]

EN ISO 9702-1998

塑料　胺类环氧固化剂　伯、仲和叔胺基团氨含量的测定

Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996)

[详细信息]

prEN 1157-1993

焊接 工作位置 倾斜角和旋转角定义

Welds; working positions; definitions of angles of slope and rotation

[详细信息]

EN 1337-7-2000

结构轴承 第7部分：球轴承和园柱PTFE轴承

Structural bearings - Part 7: Spherical and cylindrical PTFE bearings

[详细信息]

prEN 12565-2000

加纤水泥管线的静态计算指南

Guidelines for static calculation of fibre-cement pipelines

[详细信息]

ENV 1991-2-5-1997

欧洲法典1：设计基础和对结构影响 第2-5部分：热的影响

Eurocode 1: Basis of design and actions on structures - Part 2-5: Actions on structures - Thermal actions

[详细信息]

prEN 14420-6-2002

带夹具的软管配件 第6部分：：TW罐式卡车连接

Hose fittings with clamp units - Part 6: TW tank truck couplings

[详细信息]