标准号 |
标准中文名称 |
标准英文名称 |
摘要 |
EN 303-6-2000 |
供暖锅炉 第6部分：带强制通风燃烧器的供暖锅炉 带额定热输入不超过70kW的雾化油燃烧器的结合式锅炉的家 |
Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW |
[详细信息] |
EN 12051-1999 |
建筑物五金件 门和窗的插销 要求和试验方法 |
Building hardware - Door and window bolts - Requirements and test methods |
[详细信息] |
EN 12589-2001 |
建筑物通风 送风口设备 恒定及可变风速的送风口设备的空气动力学试验及额定性能 |
Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
[详细信息] |
EN 35-2000 |
沿缘供水座式坐浴盆 连接尺寸 |
Pedestal bidets with over-rim supply - Connecting dimensions |
[详细信息] |
EN 1458-1-1999 |
标称热输入不超过6kW型号为B22D和B23D的家用直接燃气转笼烘干机 第1部分：安全性 |
Domestic direct gas - fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
[详细信息] |
EN 12599-2000 |
建筑物通风 对交货时已安装好的通风和空调系统的试验程序和测量方法 |
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems |
[详细信息] |
EN ISO 15212-2-2002 |
振荡型密度计 第2部分：均质液体用过程测量仪器 |
Oscillation-type density meters - Part 2: Process instruments for homogenous liquids (ISO 15212-2:2002) |
[详细信息] |
EN 61162-400-2002 |
海上导航和无线电通信设备及系统 数字接口 第400部分：多能话器和多受话器 船用系统互连 介绍和一般原 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 400: Multiple talkers and multiple listeners; Ship systems interconnection; Introduction and general principles (IEC 61162-400:2001) / Note: Endorsement notice |
[详细信息] |
EN ISO 14891-2002 |
乳和乳制品 测定氮含量 根据托马斯(Dumas)原理使用常规燃烧法 |
Milk and milk products - Determination of nitrogen content - Routine method using combustion according to the Dumas principle (ISO 14891:2002) |
[详细信息] |
prEN 190300-1994 |
分规范：单片接口集成电路 |
Sectional specification: interface monolithic integrated circuits (CECC 90300:1987) |
[详细信息] |
EN 61920/prA11-2000 |
红外传输系统 大气作用 修改A11 |
Infrared transmission systems - Free air applications; Amendment A11 |
[详细信息] |
EN 61162-401-2002 |
海上导航和无线电通信设备及系统 数字接口 第401部分：多能话器和多受话器 船用系统互连 应用轮廓 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 401: Multiple talkers and multiple listeners; Ship systems interconnection; Application profile (IEC 61162-401:2001) |
[详细信息] |
EN 438-2-1991 |
装饰高压层压板(HPL) 以热固树脂为基质的板 第2部分：特性测定 |
Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988 modified) |
[详细信息] |
EN ISO 8256-1996 |
塑料 拉伸冲击强度测定 包括技术勘误1 |
Plastics - Determination of tensile-impact strength (ISO 8256:1990, including Technical Corrigendum 1:1991) |
[详细信息] |
EN ISO 15027-1-2002 |
浸渍服装(Immersion suits) 第1部分：耐磨服装包括安全的要求 |
Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2002) |
[详细信息] |
EN 61010-2-081-2002 |
测量、控制和实验室用电气设备的安全要求 第２－８１部分：分析和其他用途的自动及半自动试验室设备的特殊 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC 61010-2-081:2001) / Note: Endorsemen |
[详细信息] |
EN ISO 3451-1-1997 |
塑料 灰分的测定 第1部分：一般方法 |
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:1997) |
[详细信息] |
prEN 190202-1994 |
空白详细规范：集成运算放大器 |
Blank detail specification: integrated operational amplifiers (CECC 90202:1989) |
[详细信息] |
prEN 61249-2-1-2002 |
印制板和其它互连结构用材料 第2-1部分：包被和非包被增强基材分规范集 酚酝纤维纸增强层压薄板、经济级 |
IEC 61249-2-1, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-1: Sectional specification set for reinforced base materials, clad and unclad; Phenolic cellulose paper reinforced laminate sheet, economic grade,copper clad |
[详细信息] |
EN ISO 11403-2-1999 |
塑料 可比多点数据的采集和表示 第2部分：热和加工性能 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995) |
[详细信息] |
EN 728-1997 |
塑料管道和导管系统 聚烯烃管和配件 氧化感应时间的测定 |
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
[详细信息] |
prEN 61647-4-2001 |
低压浪涌保护装置元件 第4部分：闸流管浪涌抑制器规范 |
IEC 61647-4, Ed. 1: Components for low-voltage surge protective devices - Part 4: Specification for thyristor surge suppressor (TSS) |
[详细信息] |
EN ISO 584-1997 |
塑料 不饱和聚酯数脂80℃时的反应性测定(常规方法) |
Plastics - Unsaturated polyester resins - Determination of reactivity at 80 ℃ (conventional method) (ISO 584:1982) |
[详细信息] |
EN ISO 10363-1995 |
热熔粘胶剂 热稳定性测定 |
Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992) |
[详细信息] |
EN ISO 14631-1999 |
冲击改良的聚苯乙烯(PS-I)的挤压片 要求和试验方法 |
Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999) |
[详细信息] |
