标准号 |
标准中文名称 |
标准英文名称 |
摘要 |
DIN 2781-1990 |
机床.液压机用45°单程锯齿螺纹 |
(Machine tools; buttress thread 45, single start, for hydraulic presses) |
[详细信息] |
DIN 22433-1990 |
矿山照明.概念 |
(Lighting for underground mining; concepts) |
[详细信息] |
DIN 20379-1990 |
凿岩.湿式凿岩用带内圆锥体的冲击钻头 |
(Rock drilling; tapered bits for percussive wet drilling) |
[详细信息] |
DIN 8185-1990 |
支承链升降机用滚子链 |
(Roller chains for substained chain elevator) |
[详细信息] |
DIN ISO 9011-1990 |
同步皮带传动装置.汽车皮带轮 |
(Synchronous belt drives; automotive pulleys; identical with ISO 9011:1987) |
[详细信息] |
DIN EN 1294-2000 |
门扉.连续一致气候下湿度不同时的性能测定 |
(Door leaves - Determination of the behaviour under humidity variations in successive uniform climates; German version EN 1294:2000) |
[详细信息] |
DIN EN ISO 13000-2-1998 |
塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 |
(Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997); German version EN ISO 13000-2:1997) |
[详细信息] |
DIN 55907-1990 |
颜料.群青颜料.要求和检验 |
(Pigments; ultramarine pigments; requirements and method of test) |
[详细信息] |
DIN ISO 7996-1990 |
环境空气.氧化氮含量浓度的测定.化学发光法 |
(Ambient air; determination of the mass concentration of nitrogen oxides; chemiluminescence method; identical with ISO 7996:1985) |
[详细信息] |
DIN 22425-1990 |
矿山用防雷防爆电气设备.三角螺母 |
(Electrical apparatus for potentially explosive atmospheres for mining; triangular nuts) |
[详细信息] |
DIN 65156-1989 |
航空和航天.100°沉头钢制配合铆钉.铆钉公差0至0.02mm.公制系列 |
(Aerospace; close tolerance steel rivets with 100 flush head, shank tolerance 0 to0,02 mm, metric series) |
[详细信息] |
DIN 988-1990 |
配合垫圈与支承垫圈 |
(Shim rings and supporting rings) |
[详细信息] |
DIN 11504-1968 |
计奶容器.公称容量100.120.150和200升 |
(Milk tanks, 100, 120, 150, 200 l capacity) |
[详细信息] |
DIN 50437-1979 |
无机半导体材料的检验.用红外线干涉法测量硅外延生长层的的厚度 |
(Testing of semi-conductive inorganic materials; measuring the thickness of silicon epitaxial layer thickness by infrared interference method) |
[详细信息] |
DIN 29921-1989 |
航空和航天.六角头和螺纹锁紧的钢制螺纹铆钉 |
(Aerospace; blind rivets of steel with hexagon head and thread locking) |
[详细信息] |
DIN 46281-1976 |
防爆装置用扁平接线板.用于2.5mm2以下的导线.直流600V.交流500V.10A |
(Flat terminal connection strips for electrical apparatus in firedamp proof and explosion protected enclosures) |
[详细信息] |
DIN EN 13010-2003 |
包装.单元包装.标记板显示的尺寸和要求 |
(Packaging - Unit packaging - Dimensions and requirements for pegboard display; German version EN 13010:2003) |
[详细信息] |
DIN EN 12707-2000 |
塑料柱桶.额定容量为210L,220L和225L的非移动盖(封闭盖)的柱桶.德文版本EN12709-1999 |
(Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l; German version EN 12707:1999) |
[详细信息] |
DIN ISO 3907-1991 |
硬质合金.碳总含量的测定.重量分析法 |
(Hardmetals; determination of total carbon content; gravimetric method; identical with ISO 3907:1985) |
[详细信息] |
DIN 53847-1988 |
纺织品的检验.鱼网用带编织浮筒的绳缆的拉力试验 |
(Testing of textiles; tensile testing of float lines with woven-in floats for fishing nets) |
[详细信息] |
DIN 10113-1-1997 |
食品行业中设备和器皿上表面细菌量的测定.第1部分:定量拭子法 |
(Determination of surface colony count on fitment and utensils in foodareas - Part 1: Quantitative swab method) |
[详细信息] |
DIN EN ISO 13787-2003 |
建筑设备和工业装置用热绝缘产品.声明的导热系数的测定 |
(Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003); German version EN ISO 13787:2003) |
[详细信息] |
DIN 547-1986 |
端面带孔圆螺母 |
(Round nuts with drilled holes in one face) |
[详细信息] |
DIN EN 10304-2001 |
继电器用磁性材料(钢铁) |
(Magnetic materials (iron and steel) for use in relays; German version EN 10304:2001) |
[详细信息] |
DIN EN 13088-2001 |
填充羽毛和绒毛的物品.测定填充产品的总重量和填充物重量的方法 |
(Manufactured articles filled with feather and down - Method for the determination of a filled product`s total mass and for the determination of the mass of the filling; German version EN 13088:2001) |
[详细信息] |
