标准号

标准中文名称

标准英文名称

摘要

BS 4551-2-1998

找平层、灰泥和灰浆的试验方法.化学分析和集料分级

(Methods of testing mortars, screeds and plasters - Chemical analysis and aggregate grading)

[详细信息]

BS ISO 5593-1998

滚动轴承.词汇

(Rolling bearings - Vocabulary)

[详细信息]

BS DD 241-1-1997

控制网规范.一般描述

(Specification for ControlNet - General description)

[详细信息]

BS EN 145-1998

呼吸保护装置.自给式闭路压缩氧型或压缩氧氮型呼吸器.要求,试验,标记

(Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking)

[详细信息]

BS EN ISO 2203-1997

技术制图.齿轮的习惯画法

(Technical drawing - Conventional representation of gears)

[详细信息]

BS EN 794-1-1997

肺呼吸器.临危看护呼吸器的特殊要求

(Lung ventilators - Particular requirements for critical care ventilators)

[详细信息]

BS EN ISO 105-Z09-1998

纺织品.染色牢度试验.水溶染料冷水溶解度的测定

(Textiles - Tests for colour fastness - Determination of cold water solubility of water-soluble dyes)

[详细信息]

BS ISO IEC 10021-7-1998

信息技术.文电处理系统(MHS).人际文电系统

(Information technology. Message handling systems (MHS). Interpersonal messaging system)

[详细信息]

BS DD 242-1998

高度安全区域防盗报警系统实施规程

(Code of practice for intruder alarm systems for high security areas)

[详细信息]

BS EN 26360-2-1998

牙科学.旋转式牙科器械.数字编码体系.形状和特殊性能.

(Dentistry - Dental rotary instruments - Number coding system - Shape and specific characteristics)

[详细信息]

BS EN 50170-1997

通用区域通信系统

(General purpose field communication system)

[详细信息]

BS EN ISO 7785-2-1998

牙钻手柄.直的和齿角型牙钻手柄

(Dental handpieces - Straight and geared angle handpieces)

[详细信息]

BS EN 1559-5-1998

铸造.交货技术条件.镁合金铸件的附加要求

(Founding - Technical conditions of delivery - Additional requirements for magnesium alloy castings)

[详细信息]

BS EN 12106-1998

塑料管道系统.聚乙稀(PE)阀门.压出后抗内压性的试验方法

(Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off)

[详细信息]

BS EN ISO 3386-1-1998

泡沫柔性聚合材料.压缩应力应变特性的测定.低密度材料

(Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Low-density materials)

[详细信息]

BS EN 130901-1998

电子元器件质量评定协调体系.空白详细规范:固定聚苯乙烯膜介电金属箔直流电容器.评估E级

(Harmonized system of quality assessment for electronic components - Blank detail specification: fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level E)

[详细信息]

BS EN 60669-2-2-1998

家用和类似固定电气设备用开关.特殊要求.远程控制开关(RCS)

(Switches for household and similar fixed electrical installations - Particular requirements - Remote-control switches (RCS))

[详细信息]

BS EN 60512-19-3-1998

电子设备用机电元件.基本试验程序和测量方法.耐化学性能试验.抗液性

(Connectors for electronic equipment - Tests and measurements - Chemical resistance tests - Fluid resistance)

[详细信息]

BS 6049-8-1998

茶叶试验方法.粒度分析法分级

(Methods of test for tea - Classification of grades by particle size analysis)

[详细信息]

BS 6336-1998

燃烧试验的进程和试验数据的表示及风险评估中试验的作用指南

(Guide to the development of fire tests, the presentation of test data and the role of tests in hazard assessment)

[详细信息]

BS 7403-4-1998

内燃机液流润滑油滤清器.初始微粒滞留效率,寿命和累积效率的试验方法(重量计法)

(Full-flow lubricating oil filters for internal combustion engines - Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method))

[详细信息]

BS EN 12134-1998

水果和蔬菜汁.离心果肉含量的测定

(Fruit and vegetable juices - Determination of centrifugable pulp content)

[详细信息]

BS EN ISO 3506-3-1998

耐腐蚀不锈钢紧固件的机械特性.不低于拉伸应力的定位螺丝和类似紧固件

(Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress)

[详细信息]

BS EN 160100-1998

电子元器件质量评定协调体系.分规范:经过质量评定的印制板组件制造厂的能力鉴定

(Harmonized system of quality assessment for electronic components - Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality)

[详细信息]

BS EN 60512-1998

电子设备用机电元件.基本试验过程和试验方法.耐化学性试验.流体阻力

(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Chemical resistance tests. Fluid resistance)

[详细信息]