标准号 |
标准中文名称 |
标准英文名称 |
摘要 |
ANSI C78.1421-2002 |
投射灯尺寸和中心定位系统.GZ4基的35mm整体反射轮辋标准灯 |
(Dimensions and Centering Systems for Projection Lamps - 35mm Integral Reflector Rim Reference Lamps with GZ4 Bases ) |
[详细信息] |
ANSI IEEE 205-2001 |
电视标准:荧光信号级的测量 |
(Standard on Television: Measurement of Luminance Signal Levels) |
[详细信息] |
ANSI ASTM D1679-2002 |
75℃运行的电线和电缆用合成橡胶的耐热和耐湿绝缘性规范 |
(Specification for Synthetic Rubber Heat- and Moisture-Resisting Insulation for Wire and Cable, 75 Deg C Operation ) |
[详细信息] |
ANSI ASTM D445-2003 |
透明和不透明液体运动粘度的试验方法(和动粘度的计算) |
(Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity), Method of Test for (05.01) (10.03) ) |
[详细信息] |
ANSI ASTM E1384a-2002 |
自动化管理的原始记录内容和结构的描述指南 |
(Description for Content and Structure of an Automated Primary Record of Care, Guide for (14.01) ) |
[详细信息] |
ANSI ISA RP12.13.02-2002 |
可燃气体检测装置的安装、运行和维护推荐实施规程 |
(Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments ) |
[详细信息] |
ANSI ASTM D6096-2002 |
90C操作的电线和电缆用聚氯乙烯绝缘规范 |
(Specification for Poly(vinyl Chloride) Insulation for Wire and Cable, 90 C Operation ) |
[详细信息] |
ANSI TIA EIA 136-133-D-2002 |
数字通信量信道层3 |
(Digital Traffic Channel Layer 3 ) |
[详细信息] |
ANSI EIA-364-52A-2003 |
连接器/插座中使用的触点终端的软钎焊性的TP52试验程序 |
(TP 52 Test Procedures for Solderability of Contact Terminations Use in Connectors/Sockets ) |
[详细信息] |
ANSI TIA EIA-604-13-2002 |
FOCIS 13.光纤连接器互配性标准.类型SFOC 1.25 |
(FOCIS 13 - Fiber Optic Connector Intermateability Standard, Type SFOC 1.25 ) |
[详细信息] |
ANSI ASME B107.40-2002 |
喇叭管式螺母扳手(英制和米制系列) |
(Flare Nut Wrenches (Inch and Metric Series) ) |
[详细信息] |
ANSI ASTM F2192-2002 |
测定和报告海事救难装置的靠船能量和反应、系泊反应和偏差的试验方法 |
(Test Method to Determine and Report the Berthing Energy and Reaction and the Mooring Reaction and Deflection of Marine Fenders ) |
[详细信息] |
ANSI UL 1684-2002 |
增强热固树脂管件和配件 |
(Reinforced Thermosetting Resin Conduit (RTRC) and Fittings ) |
[详细信息] |
ANSI EEE 2001-2002
|
因特网推荐实施规范.网页工程.内部网/外部网用 |
(Recommended Practice for Internet Practices - Web Page Engineering - Intranet/Extranet Applications ) |
[详细信息] |
ANSI INCITS ISO IEC 13568-2002 |
信息技术.Z格式规范标志法.语法、形式系统和语义学 |
(Information technology - Z formal specification notation - Syntax, type system and semantics ) |
[详细信息] |
ANSI SCTE 86-2003 |
SCTE光缆类型和推荐的使用设施 |
(SCTE Fiber Optic Cable Types and Recommended Applications ) |
[详细信息] |
ANSI ASME B107.43-2002 |
电子测试机.手工转矩工具 |
(Electronic Tester, Hand Torque Tools ) |
[详细信息] |
ANSI IPC WHMA-A-620-2002 |
电缆和导线系列组件的要求和验收 |
(Requirements and Acceptance for Cable and Wire Harness Asssemblies ) |
[详细信息] |
ANSI ASTM E2141-2002 |
密封绝缘玻璃组件上可吸收性电化色涂层的耐久性的评定方法 |
(Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Note 1) ) |
[详细信息] |
ANSI Z21.47-2003 |
燃气集中供热炉 |
(Gas-Fired Central Furnaces (same as CSA 2.3) ) |
[详细信息] |
ANSI TIA EIA-637-B-2002 |
宽频带系统短信服务 |
(Short Message Services for Spread Spectrum Systems ) |
[详细信息] |
ANSI API RP17A-2002 |
水下生产系统的设计和运行推荐实施规程 |
(Recommended Practice for Design and Operation of Subsea Production Systems ) |
[详细信息] |
ANSI ASTM D975-2003 |
柴油机燃料油规范 |
(Specification for Diesel Fuel Oils (05.01) ) |
[详细信息] |
ANSI ASTM F2206-2002 |
熔缝的聚乙烯塑料管,管配件,片材,板材或砧板材制造的配件规范 |
(Specification for Fabricated Fittings of Butt-fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock or Block Stock ) |
[详细信息] |
ANSI ASTM D6793-2002 |
测定等温正割和正切体积弹性模量的试验方法 |
(Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus ) |
[详细信息] |